PARA755 (P755) CYCLOPS Deluxe Remote Immobiliser

PARA755 (P755) CYCLOPS Deluxe Remote Immobiliser

This Australian Standards approved immobiliser provides two circuits of automatic engine immobilisation operated by rolling code random encrypted remote control, with inbuilt intelligent auto transponder disarm. The system will provide visual confirmation via the vehicles indicators, high intensity blue LED’s dash and windscreen mounted. The system may provide keyless entry. and can be upgraded to provide full alarm functions via siren and sensors additions.

Arming procedure while ignition is off
i

The system will arm immediately if the main button of a valid remote control is momentarily pressed, the doors will lock and all security functions will become active

Disarming procedure

The system will disarm when the main button of a valid remote control is pressed.

Auto Arming

The car's engine is automatically immobilised 40 seconds after the engine has stopped. The auto-arming feature is disabled while the system is disarmed and the ignition switch is in the ON position

Available for light trucks

The P755 system is also available for light trucks which use a +24 Volts battery supply.

Dual Immobilisation Circuits

The system features two independent 30 Amp rated, normally open immobilisation circuits, which break engine critical signals in the vehicle. Starter motor, fuel pump, fuel injection, main ignition are commonly immobilised circuits

Safety circuitry in case of power failure

System sources alternate power from ignition if main power is lost

Third circuit of immobilisation (optional)
i

Additional immobilisation circuits can be added to conform with insurance company requirements.

Component protection against harsh road conditions

All relays are fully encapsulated to provide protection against dust and moisture.

Rolling Code / Code Hopping

Rolling code encoder with over 18,000,000,000,000,000,000+ code combinations, transmitting via 433MHz PWM RF signal

Controller Type

Uses REM-090T remote controls, see remote control details.

Remote control with transponder enhancements

Allows the immobiliser to disarm automatically when ignition switch is turned on

Large system memory

Allows system to track ten controllers

Controller re-programming

Service technician can delete lost or stolen controllers from memory.

Remote battery life

Two CR2016 Lithium batteries have a expected average life span of between 9 and 18 months (depending on usage). Battery manufacturer may vary due to availability of stock.

Security wiring

All cables extending from the control module are black and same diameter. Identifying wire tags are removed by the installer during installation of the system

Plug and play for service

Designed to allow easy access for service technicians. Plugs and sockets are located inside the main control module to protect against access by thieves

Security housing

Connector plug is enclosed within module case to prevent access by thief.

Stealth wiring

Cutting any immobilisation wiring will still leave the car secure. Bypassing security is not possible by simply removing the system from the vehicle

Emergency Personal Identification Number (PIN) override
P

If the valid controller are lost, stolen or broken, the user by over-ride the system by enter the secret four digits via the ignition switch

Alterable PIN
P

A factory programmed PIN comes standard with each system. It is recommended the owner of the system changes the PIN to a new, easily remembered number

One shot override

Immobiliser always re-arms to protect vehicle. Re-enter PIN if vehicle needs to be driven after auto-arming has occurred

PIN card

A record of the factory programmed override PIN is supplied on handy wallet sized card.

Super bright blue dash LED

This LED flashes to inform user when system is armed. The LED is mounted on the driver's side dash and is visible from outside the window

Super bright blue windscreen LED
i

This LED flashes to inform user when system is armed. The LED is mounted on the driver's side dash and is visible from outside the window

Arm/Disarm confirmation
i

System flashes car indicators when arming or disarming

Alarm illumination
i

System flashes car indicators when thief triggers alarm

Trigger diagnostics
i

System will flash indicators to report the last triggered circuit

Negative siren output

Can be used to trigger car horn relay or siren

Arm/Disarm confirmation
iP

System sounds a siren or horn when arming and disarming

Temporary arm/disarm chirp disable
i

Momentarily press the second button of the remote control before pressing the main button, the siren will not chirp during that one operation

Doors, bonnet and boot monitoring
i

Triggers alarm system if intruder opens any protected entry point in vehicle

Audio glass breakage detection
i

Uses the sound of the breaking glass to trigger (not vibration)

Accepts plug-in Ultra-sonic sensor
i

Sensor produces a 40KHz sound wave and measures echo to detect intruder

Accepts plug-in single zone microwave sensor
i

Sensor produces a microwave field to detect intruder,

Accepts plug-in dual zone microwave sensor
i

Sensor produces two microwave fields, exterior field to sound siren as warning, interior to trigger alarm in full

Accepts plug-in single stage shock sensor
i

Sensor measures vibration subjected to vehicle to detect intruder.

Accepts plug-in two stage shock sensor
i

Sensor measures two levels of shock, soft shock to sound siren as warning, heavy shock to trigger alarm in full.

Compatible with tilt sensor
i

Sensor measures vehicle angle with respect to earth, triggers if angle changes - no response to vibration

Locks and unlocks all doors
i

System can trigger factory central locking, aftermarket central locking or central locking relay

Variable pulse time
P

Extend pulse length to drive pneumatic central locking systems (Mercedes)

Automatic re-locking
iP

System will re-arm and re-lock doors if previously disarmed by remote control and doors remain closed

Anti-hijacking protection
iP

System locks doors when ignition is turned on, unlocks when ignition is turned off

Dual stage unlock
i

Allows user to unlock driver's door before unlocking all other doors

Current draw

Wide Operating voltage

Operating voltage +9VDC to +15VDC

Operating temperature

-20 degrees to +85 degrees for equipment designed to be installed within vehicle cabin. -20 degrees to +105 degrees for equipment designed to be installed inside engine compartment.

Polarity protection

The system circuitry is design to protect itself against accidental battery polarity reversal. This can happen when replacing the vehicle battery

Independent indicator power fuse

System uses independent fuse to power indicators, ensures short circuit in indicator circuit does not affect system operation.

Short circuit protection

The power supply wire to the system is protected against an internal fault within the system.

Panic / Car Finder
i

Press and hold second button of remote control to cause horn to sound and indicators to flash

Electric window closer
i

Provides signals used by electric window closers, system will close all electric windows when armed by remote control

Courtesy light switch activation
iP

System switches courtesy light on for 30 seconds or until ignition switch is turned on, when disarmed

Electronic boot release
i

Press and hold the secondary remote control button, while system is disarmed, to activate boot release output. The indicators will flash four time each time the boot release signal is sent

Open door warning
i

Siren will chirp 8 times if door is open, and 6 times if bonnet is open; while system is being armed

Full diagnostic report

Press and hold both buttons on a valid remote control to receive report of last three triggers

Low remote battery warning

System will flash indicators twice when ignition is turned on to report remote control battery is low

Installation Guide

Complete installation guide and specifications for the Alarm/Immobilisers.

User Guide

Informs the end-user of the system's functions, features and limitations.

Manufacturers warranty on Control module
i

Guarantees control module is free from manufacturing defects for 24 months from time of purchase

Manufacturers warranty on Sundry items
i

Guarantees remote controls, siren and sundry items are free from manufacturing defects for 12 months from time of purchase

Australian Standard for vehicle Immobilisers

AS/NZS 4601:1999

Manufactured in ISO9001 facility

Built within world standard production facility.

AS/NZS 4601 sundry standards of compliance (or parts thereof)

AS1939 - Degrees of protection provided by enclosures for electrical equipment (IP Codes)
AS3300 - Approval and test specification - General requirements for household and similar electrical appliances
AS/NZS3548 Limits and methods of measurement of radio disturbance characteristics of information technology equipment
AS/NZS3749 - Intruder alarm systems - Road vehicles
AS/NZS4268 - Radio equipment and systems - Short range devices
AS/NZS61000 - Electromagnetic compatibility (EMC)
NZS6300 - Approval and test specification - General requirements for household and similar electrical appliances
ISO7637 - Road vehicles - Electrical disturbance by conduction and coupling
IEC61000 - Electromagnetic compatibility (EMC)
ASTM B117 - Standard practice for operating salt spray (fog) apparatus