SEN-003/4 Cyclops 4 head reverse sensor with Display

SEN-003/4 Cyclops 4 head reverse sensor with Display

This sensor is designed to provide an aid to reverse parking. The driver is made aware of any obstacles behind the vehicle which may not be visible

Four ultrasonic detector heads

Detector heads may be mounted flush in the bumper or above/below bumper on brackets where clearance behind bumper does not allow for flush mounting

Digital display shows distance to obstacle

LED segment display shows distance to closest obstacle in meters, increasing or decreasing in 0.1m increments. LED's make distance visible especially at night

Obstacle location display

Display also features a three segment bar graph for each side of the car. Left and right bar graphs light according to which side the obstacle is located. If right bar is at maximum due to obstacle at close range, the left bar code will still display measurements for obstacles further away on left hand side (and vice-versa)

Piezo buzzer warning

Display module emits beeps as vehicle approaches obstacle. The beeps become more frantic as the distance to the obstacle gets smaller

Wide Operating voltage

Operating voltage +9VDC to +15VDC

Accuracy and coverage

Systems are supplied in four head configuration to provide high accuracy and wider coverage

Measurements

Sensors will pickup obstacles between 0.3 to 2.0 metres in 0.1 metre increments

Power Consumption

Each additional sensor added to a system will increase it's over-all power consumption from the car battery.

System compatibility issues

There are three versions of the reversing system that have been sold in Australia.

User and Installation Guide

Generic instructions on how to fit the sensors and how they work.

Manufacturers warranty
i

Guarantees product is free from manufacturing defects for 12 months from time of purchase