GBS-4XR Cyclops Glass Breakage Sensor

GBS-4XR Cyclops Glass Breakage Sensor

Audio glass protection for all vehicles with hard-top and windup windows. Sensor is not prone to false alarm due to vibration

Audio Intrusion Detection
Built-in amplifiers filter and amplify the noises inside the cabin of vehicle. When the high frequencies associated with breaking glass are detected, as trigger signal is sent to the alarm system

Active Microwave Protection Field

Built-in electret microphone picks up all sound from inside the vehicle, filtering everything except the high frequencies associated with smashing glass. Triggers if the noise exceeds the set level

Temperature compensative circuitry

Ensures sensitivity does not change as ambient temperature rises or falls

Sensitivity adjustment

Sensor allows installer to adjust sensitivity to provide compatibility with different size vehicles

Trigger status indicator

LED indicator shows when sensor is triggered (dual stage/zone sensors include one colour for each trigger)

Super low current draw

1.3mA when idle, 11mA when triggered for 2 seconds

Wide Operating voltage

Operating voltage +9VDC to +15VDC

Operating temperature

-20 degrees to +85 degrees for equipment designed to be installed within vehicle cabin

Trigger output rating

Each output of the sensor can sink 300mA, suitable for energising relay coil when necessary

Trigger output is back EMF protected

Each output of the sensor can sink 300mA, suitable for energising relay coil when necessary

Trigger output is back EMF protected

Clamping diode protects the output driver transistor(s) to stop damage from the super high voltages that occur when a relay coil is released

Can protect open top vehicles

Microwave field will not pickup movement of air. The field provides it's own boundaries, so perfect for convertibles

Power Consumption

Each additional sensor added to a system will increase it's over-all power consumption from the car battery.

Compatible with Cyclops remote control systems

Cyclops range of immobilisers/alarms : P355, P375, P375B, P385, P455, P485,P755, P775, P775B, P785, KE-CLR-TX90, KE-CLR-TX11, S35i, S35B, S35C, S75i, S75B, S455, S485 and S75C

Cannot drive relay as standard

No back EMF protection on the trigger output, installer must add external protection

No reverse polarity protection

This sensor was designed to be used exclusively with the P355-785 & S35i-S75C alarms/immobilisers, these modules provide reverse polarity protection. Installer must add protection if install in non-conventional way

Installation Guide

Generic instructions on how to fit the sensors with blue plug and how they work.

Manufacturers warranty
i

Guarantees product is free from manufacturing defects for 12 months from time of purchase

Manufactured in ISO9001 facility
i

Built within world standard production facility

Volumetric protection sensors

Tested to and passed AS3749 section 3.4