REM-021 CYCLOPS Remote Control

REM-021 CYCLOPS Remote Control

Red LED RF – 304MHz

Compatible with 661 / s661

Factory codes – TX17, PCB TX17(2240)SAW_V02

 

RF Transmission Frequency

304MHz pulse width modulated (adjustable)

Standard code transmission

Each remote control is programmed with only one of several billion billion code combinations. No code is ever programmed into more than one remote control.

Battery type

27a, 12 volt, alkaline

High Intensity LED

Red high intensity 3mm LED

Remote battery life

The 27a 12 volt 20mAH alkaline battery has a expected average life span of between 6 and 12 months (depending on usage). Battery manufacturer may vary due to availability of stock. See the GP battery manufacturer website.

Printed Circuit Board Marking

R17-PT

Switch Type

This remote control uses 2 x double pole, double throw, SMT switches. Each switch has 4 pads

Uses SWI-008 two pin switch

Two single pole single, throw normally, open contacts, which all become common when switch is pressed. Four pins per switch.

Compatible with Cyclops remote control systems
i

Cyclops alarm/immobilisers S661 and May require additional hardware or connections. 661.

Compatible with these remote controls

Many remote controls have the same encoder and transmission frequency.

Programming Instructions

Details the programming procedure for installing new remote controls into a alarm/immobiliser memory. Also includes a list of possible problems if the procedure fails.